Skip to product information
Systellar CC-MPPT-Gen6-200 for 12V, 24V, 36V, 48V battery with SMU Function
Rs. 0.00
Experience unparalleled solar power optimization with the MPPT Gen6 Solar Charge Controller, the latest product from Systellar Innovations. Engineered with advanced Triple Interleaved Synchronous Buck Converter technology, this MPPT (Maximum Power Point Technology)controller ensures maximum energy harvest and gives superior battery performance. It’s the ultimate solution for modern solar setups, supporting 12V, 24V, 36V, and 48V battery banks in 50A and 75A models.
CC-MPPT-Gen6-200 can work with Lead Acid (SMF / FLA / Tubular / Gel), LiFePO4, Li-ion and Ni-Cd battery type. The battery type selection can be made by the user.
SMU function model can control the Mains supply of inverter to charge batteries using Grid Electricity when required. It can be used to convert a normal inverter into Solar inverter.
| Technical Specifications | |
| Charge Controller Type | Maximum Power Point Tracking (MPPT) charging technology |
| Technology | Triple Interleaved Synchronous Buck Converters |
| Microcontroller controller | ARM-based 32-bit advanced microcontroller |
| Battery voltage range |
12V/24/36/48V (nominal) Battery type user selectable For Lead-acid batteries, number of 12V batteries can be specified. For other chemistries number of cells in the battery bank may be specified The maximum end-of-charge voltage for the battery bank can be up to 60V |
| Battery type supported (user selectable) | Lead-Acid (SMF / FLA / Tubular / Gel) |
| LiFePO4 (Lithium Ferro Phosphate) | |
| Li-ion (Lithium-ion) | |
| Ni-Cd (Nickel Cadmium) | |
| 5-stage charging for maximum battery care: | 1. Deep discharge mode charging (For Li-ion / LiFePO4 battery only) |
| 2. Bulk mode charging | |
| 3. Absorption mode charging | |
| 4. Trickle mode charging | |
| 5. Equalizing Charging (For lead-acid batteries only) | |
| Maximum open circuit solar panel voltage (Voc) | 175V for 200 model |
| Maximum Charging Current | 50A or 75A |
| Maximum open circuit solar panel voltage (Voc) | 175V for 200 model |
| Maximum allowed solar panel capacity | Maximum allowed solar panel capacity |
| 12V-50Amp - 750 Wp | |
| 24V-50Amp - 1600 Wp | |
| 36V-50Amp - 2300 Wp | |
| 48V-50Amp - 3400 Wp | |
| 12V-75Amp - 1125 Wp | |
| 24V-75Amp - 2300 Wp | |
| 36V-75Amp - 3400 Wp | |
| 48V-75Amp - 5000 Wp | |
| MPPT Tracking efficiency | Up to 98.8% |
| MPPT Conversion efficiency | 97.3% to 98.8% |
| Solar Management Unit (SMU) functionality | Yes. Can control the Mains supply of inverter to charge batteries using Grid Electricity when required. |
| DC Load function | No |
| Display type | 128×64 pixel backlit graphic display which can display 8 rows of about 22 characters each for display of running parameters during operation and for programming various programmable parameters |
| Display Parameters | Single Screen displays: PV voltage, PV current, Battery voltage, Battery current, Battery charging mode, PV power, Cumulative PV KWHr, Load On/Off status, Load current, Battery temperature, Heatsink temperature |
| Keyboard | 5 Keys (INCR, DECR, NEXT, ESC & SEL) keyboard is provided on the front panel to view / program various parameters |
| LED indicators | Green – for indicating the following conditions: |
| Low charging (< 5A): Single 100ms Blink after every 2sec | |
| High charging (> 5A): Double 100ms Blink after every 2sec | |
| Battery fully charged: Solid ON | |
| Red – The following faults are displayed: | |
| Battery discharged (Then load is disconnected): Single 100ms Blink after every 2sec | |
| Overload (Then load is disconnected): Two 100ms Blink after every 2sec | |
| Battery voltage too high: Three 100ms Blink after every 2sec | |
| PV input too high (Then charging is stopped): Four 100ms blink after every 2sec | |
| User-programmable charging parameters | Using the above LCD display & keyboard, the following charging and other operational parameters can be programmed by the user. |
| Battery end of charge voltage | |
| Battery trickle charge voltage | |
| Battery re-bulks voltage | |
| Battery Low cut enters voltage | |
| Battery Equalize charge voltage | |
| Equalizing charge interval (Only for LA battery) | |
| Temp Coefficient for selected Battery type: | |
| Power saver turn-on threshold | |
| Maximum charging current: | |
| Users can modify the maximum charge current (Mainly to protect small capacity batteries). | |
| a. For the 50Amp Model, It can be set in between 5 to 50 Amps. | |
| b. For the 75Amp Model, it can be set in between 5 to 75 Amps. | |
| Protections | PV and Battery reverse polarity protection, Battery reverse current protection at night, Battery overcharge and deep discharge protection, Battery disconnect protection, Overload protection |
| Temperature compensation of charging thresholds | With optional battery temperature sensor (For lead-acid batteries only) |
| Heat sink temperature sense | Built-in heat sink temperature sensor stops charging in case of overheating of the heat sink |
| Power saver relay (For SMU Functionality) | Built-in power saver relay. Common and N/C contacts are available for the connection of the input AC mains to the inverter. Relay capacity 250V AC 20A |
| Idle current from the battery | Max: 60 mA |
| Optional accessories: | 1. Battery temperature sensor with 2 M cable |
| 2. RS-485 adapter card for transferring data over MODBUS (RTU protocol). (Requires special MODBUS firmware). | |
| Usage | Indoor IP21 housing |
| Operating Temperature Range | 0°C to 45°C |
| Unit Weight | |
| Dimensions (H x W x D) | |
| Mounting | Vertical wall mount |
| Manufacturing Warranty | Two year |